End-unwrapping solution for Food industry
CSW Multifeeder-4 Wide
CSW Multifeeder-4 Wide (MF-4-Wide) for aluminium can-ends as well as steel-ends, with a maximum capacity of un-wrapping four (4) rolls per minute, based on a double discharge and double infeed to the downstream seamer or two individual seamers.
Unwrapped ends are either fed to a magnetic separator or are fed directly towards to the downstream seamer/ filler equipment.
- Ends up to Ø 153 mm
- Completely stainless steel structure
- Driven Flow Storage table with optoc ensuring controlled feeding of rolls
- Unwrapping unit by means of static knife in conjunction with rollers.
- Paper bin collector
- Easy operating and cleaning
- Minimal effort required for maintenance
- 24-hour operation – 7 day a week.
- Maximum safety for operating staff
CSW guarantees a machine efficiency of
minimal 98% according to OEE.
|Seamer connection||Double end infeed or feeding 2 seamers|
|Can-ends per hour||max. 120,000|
|Can diameter||73 – 127|
|Roll length||1,020-1,200 mm fixed to one length|
|Roll length variation||± 35 mm|
|Roll capacity||Max. 4 rolls/min. based on double discharge|
|Packing of rolls||Acc. to CSW spec.|
|Compressed air||6 bar (g)|
|Air connection||10 mm|
|Compressed air consumption||200 NI/min.|
|E-Power connection||400V; 3 phase; 50 Hz and Earth|
|Total connected power||2 kW|
|Peak power consumption||1 kW|
|Stand by||0.2 kW|
|Nett weight approx.||1,200 kg|
Please note that submitted energy consumptions are for indication purposes only, equipment energy consumption depends on actual system configuration for your specific requirements.
For your specific requirements please contact your CSW representative, call +31 (0) 570 678 700 or find your local CSW agency ›.