End-unwrapping solution for Food industry
CSW Mini-Multifeeder Wide Plastic
An automatic can-end unwrapping unit for low capacity lines suitable for the Food industry, capable of unwrapping 4 roll-ends per minute with can ends wrapped tightly in plastic foil.
CSW Mini-Multifeeder Wide Plastic– MF-Wide-Plastic for aluminium can-ends as well as steel-ends, with a maximum capacity of un-wrapping four (4) rolls per minute. Unwrapped ends are either fed to a magnetic separator or are fed directly towards to the downstream seamer/ filler equipment.
- Ends up to Ø 153 mm
- Completely stainless steel structure
- Driven Storage table with optoc ensuring controlled feeding of rolls
- Unwrapping unit by means of air knifes in conjunction with rollers.
- Easy operating and cleaning
- Minimal effort required for maintenance
- 24-hour operation – 7 day a week.
- Maximum safety for operating staff
CSW guarantees a machine efficiency of minimal 99% according to OEE.
| Model | MMF-Wide Plastic | Note |
|---|---|---|
| Seamer connection | Single end feed | |
| Can-ends | Aluminium/Steel | |
| Can-ends per hour | ||
| Can diameter | 73 – 127 | |
| Roll length | Fixed to one length | |
| Roll variation | +/- 35 mm | |
| Roll capacity | Max. 2 rolls/min. | |
| Packing of rolls | Acc. to CSW spec. | |
| Compressed air | 6 bar (g) | |
| Air connection | 10 mm | |
| Compressed air consumption | 125 NI/min. | |
| E-Power connection | 400V; 3 phase; 50 Hz and Earth | |
| Total connected power | 2 kW | |
| Peak power consumption | 1 kW | |
| Stand by | 0.2 kW | |
| Dimensions incl packaging | 5.5 * 2.3 * 2 (mtr) | |
| Nett weight approx. | 1,200 kg |
Please note that submitted energy consumptions are for indication purposes only, equipment energy consumption depends on actual system configuration for your specific requirements.
For your specific requirements please contact your CSW representative, call +31 (0) 570 678 700 or find your local CSW agency ›.
