End-unwrapping solution for Beer & Beverage industry
CSW Mini Multifeeder-3
CSW Mini Multifeeder-3 (MMF-3) for aluminium can-ends as well as steel-ends, with a maximum capacity of un-wrapping three (3) rolls per minute, allowing a guaranteed capacity of 90,000 ends per hour with minimal 500 ends per sleeve, or 108,000 ends per hour with minimal 600 ends per sleeve, to the downstream seamer/ filler equipment.
- Completely stainless steel structure
- Storage table with optoc ensuring controlled feeding of rolls
- Storage capacity of 50 rolls 2.02
- Unwrapping unit by means of retractable knife in conjunction with rollers.
- Paper bin collector
- Sentinel system, for detection and automatic removal of reversed ends
- Discharge end conveyor c/w gap-control unit for controlled feeding towards seamer
- Standard 5 mtr of can-end conveyors included
- Easy operating and cleaning
- Minimal effort required for maintenance
- 24-hour operation – 7 day a week.
- Maximum safety for operating staff
CSW guarantees a machine efficiency of
minimal 99% according to OEE.
Model | MMF-3 |
---|---|
Seamer connection | Single end infeed |
Can-ends | Aluminium SOT/Steel Executing with CDL/Superends as standard |
Can-ends per hour | 90,000 with 500 ends per sleeve, 108,000 with 600 ends per sleeve |
Can diameter | 2.00-2.09 |
Roll length | 800-1,200 mm |
Roll capacity | Max. 3 rolls/min. |
Packing of rolls | Acc. to CSW spec. |
Compressed air | 6 bar (g) |
Air connection | 10 mm |
Compressed air consumption | 3.6 Nm3/h |
E-Power connection | 400V; 3 phase;50 Hz and Earth |
Total connected power | 2 kW |
Peak power consumption | 1 kW |
Stand by | 0.2 kW |
Dimensions incl packaging | 5.5 * 2.3 * 2 (mtr) |
Nett weight approx. | 1,350 kg |
Please note that submitted energy consumptions are for indication purposes only, equipment energy consumption depends on actual system configuration for your specific requirements.
For your specific requirements please contact your CSW representative, call +31 (0) 570 678 700 or find your local CSW agency ›.