Manual End Feeding

End-unwrapping solution for Beer & Beverage industry

Manual End Feed

CSW Manual End Feeding

CSW Manual FeedSimple and ergonomically solution for can-end feeding for low capacity lines. The Manual End Feed is available in single or double lane configuration.


CSW Manual End Feed system (MEF-1) for aluminium can-ends as well as steel-ends, normally used for capacities up to 30,000 can-ends per hour. Above this capacity CSW recommend an automatic un-wrapper system. The Manual End Feed has a maximum storage capacity of 5 rolls.
_VLO2342Rolls are positioned in a chute with a 30 degree angle. Paper sleeve is removed manually by operator at an ergonomically operating level. The ends- feeding chute is automatically guided during process to and from pusher unit.


The Manual End Feed is also available in a ‘twin-version’ – the MEF-2


  • CSW Manual FeedCompletely stainless steel structure
  • Storage capacity of 5 rolls
  • Pusher unit c/w discharge end conveyor
  • Gap-control unit for controlled feeding towards seamer
  • Standard 5 meter of can-end conveyors included
  • Including E-cabinet and steering & control
  • Easy operating and cleaning
  • Minimal effort required for maintenance
  • 24-hour operation – 7 day a week.
  • Maximum safety for operating staff

Technical Data

Model Manuel End Feed Single MEF-1 Manual End Feed Double MEF-2
Seamer connection Single end infeed Double end infeed
Can-ends Aluminium SOT/Steel
Executing with CDL/Superends as standard
Aluminium SOT/Steel
Executing with CDL/Superends as standard
Can-ends per hour approx. 30.000 approx. 2*30.000
Can diameter 2.00 – 2.09 other diameters on request 2.00 – 2.09 other diameters on request
Storage capacity Max. 5 rolls Max. 2*5 rolls
Components Standard as in use at CSW Standard as in use at CSW
Switch panel/ operation panel Stainless steel IP 65 Stainless steel IP 65
E- Power connection 400V; 3 phase; 50 Hz and Earth
Total connected power 0.5 kW 1.0 kW
Peak power consumption 0.25 kW 0.5 kW
Stand by 0.1 kW 0.1 kW
Dimensions incl. packaging 5.8 * 2.3 * 2.2 (mtr) 5.8 * 2.3 * 2.2 (mtr)
Nett weight approx.. 220 Kg 350 Kg

Please note that submitted energy consumptions are for indication purposes only, equipment energy consumption depends on actual system configuration for your specific requirements.


For your specific requirements please contact your CSW representative, call +31 (0) 570 678 700 or find your local CSW agency ›.