The CSW Automated Unwrapper does standard not need a Stripe Detection for orientating the rolls before cutting the paper.

 

In certain situations, for example when the paper does not meet the standard CSW roll requirements, a CSW Stripe Detection might help with improving the performance and efficiency.

 

For your specific requirements please contact your CSW representative, call +31 (0) 570 678 700 or find your local CSW agency ›.

All CSW Machines and prices are based on the CSW Mechanical Standards and the CSW Standards Europe Siemens.

 

If the customer/end-user has dedicated wishes and requirements which deviate from the CSW Standards, a further investigation can be made to the possibilities to meet these requirements and wishes. In our quotations we will provide a summary of the different positions and the individual up-prices for these positions.

 

For your specific requirements please contact your CSW representative, call +31 (0) 570 678 700 or find your local CSW agency ›.

CSW Automated unwrapping machines can handle any kind of standard Beer & Beverage end, whether B64, CDL or Superends.  Relatively new to the industry is the use of resealable or recloseable ends. CSW also can handle (most of) these as well.

 

If also resealable ends should be handled an additional CSW Upgrade Kit for Resealable Ends is applicable. More advice from CSW on this issue is mandatory, as not all resealable ends do behave in the same manner and should be judged upfront by the CSW specialists.

 

For your specific requirements please contact your CSW representative, call +31 (0) 570 678 700 or find your local CSW agency ›.

The CSW Bin Connection to centralised sleeves removal is used when a factory plant has a centralised vacuum system to remove cut sleeves from CSW unwrappers.

 

At the position of the CSW Paper Bin, a special connection flange is positioned to which the external vacuum system can be connected.

 

For your specific requirements please contact your CSW representative, call +31 (0) 570 678 700 or find your local CSW agency ›.

Each individual CSW Automated Unwrapping solution comes with a standard gravity roll storage table capable of storing 40, 50 or 60 rolls of 2.02 ends, depending on the machine. To give our customers more flexibility towards roll handling, roll buffer capacity, or for layout purposes.

flowtable

 

CSW can chose from following options:

  • CSW Driven Flow Tables
  • CSW Roll Conveyors
  • CSW Roll Depalletiser

 

Table 2.02 ends 2.06 ends
 FT100  100 rolls  85 rolls
 FT150  153 rolls  120 rolls
 FT200  180 rolls  155 rolls
 FT250  245 rolls  200 rolls

 

Roll Conveyor between Flow Table and Unwrapper

Within a standard CSW template, the CSW roll buffer table, either gravity or driven, is positioned inline of the CSW unwrapper and directly connected to the infeed of the unwrapper.

 

Roll conveyerIf the area available for the machine is narrow but long, then the CSW roll buffer table might be positioned to the side of the CSW unwrapper instead.

 

To connect the outfeed of the CSW roll buffer table and the roll infeed of the CSW unwrapper in this alternative layout configuration, a CSW roll conveyor is issued.

 

 

Roll De-palletiser

See Roll-End De-palletiser ›

 

For your specific requirements please contact your CSW representative, call +31 (0) 570 678 700 or find your local CSW agency ›.

To minimize the influence of external dust on the unwrapped ends.

 

CSW can provide several additional solutions:

  • Dust covering on the transport towards the downstream positioned seamer
  • Dust covering on the buffer carousel and its outfeed
  • Vacuum system to remove particles at the unwrapping position and at the Gap control of the seamer infeed.

 

Dustcover_sentinelDustcover_MFB

 

For your specific requirements please contact your CSW representative, call +31 (0) 570 678 700 or find your local CSW agency ›.

A CSW Manual End Feed as Bypass for automated CSW unwrappers is used in the CSW Transport towards the downstream positioned seamer, just after the CSW Unwrapper.

 

Manual_end_feed_bypass

To give the operator the opportunity to manually add a number of extra ends for finishing a series run, or to give the operator the opportunity to continue feeding the seamer, if the automated unwrapper comes to an unexpected stop. For example if the paper bin is full and should be emptied. CSW highly recommends to issue this option.

 

Calculated: one set per single outfeed of a machine

 

The CSW Manual End Feed as Bypass is included as standard with any given Multifeeder Buffer Carousel combination.

 

For your specific requirements please contact your CSW representative, call +31 (0) 570 678 700 or find your local CSW agency ›.

Simple and ergonomically solution for can-end feeding for low capacity lines. The Manual End Feeding is available in single or double lane configuration.